• BRIGHT LIGHT = BIG SAVINGS!! 150 Watt has up to 19,500 lumens with over effective 18,000 Lumens and can replace 400-500 Watt Metal Halide/HID/HPS lights, 1000W incandescent or 400W CFL. Save up to 80% on your energy! 5000K light color ensures a bright clear light.
• EASY INSTALLATION Go LED with Ease! Using our LED Corn Lights, you can do an easy LED retrofit on all your fixtures. Connects directly into E39 Mogul Bases. Just screw in. Note that Ballasts must be bypassed. (LEDs uses a driver, not a ballast)
• BETTER DESIGN 50,000 Hour Life! Over 26 years! These LED Corn Bulbs uses LED Upgraded to the latest LEDs. SMD2835 Technology to obtain 120-135 lumens per watt and project light in a 360 degree fashion. E39 LED Corn Bulb Style. LED Corn Light. Designed for better cooling with Larger Size, aluminum Heat Sink and built in fan ensure long life performance
• QUALITY AND WARRANTY 5 Year Rock Solid Warranty. High Quality Aluminum Design and clear plastic shell give it an IP64 Waterproof rating. Additional protection from dust and moisture extend its life. LEDs are rated for 25+ years of use.
• CERTIFIED - UL Listed. UL Certified products ensure better quality, safety and reliability. Replace 400-500 watt Metal Halide - Save up to 80% off Your Energy Bill

• E39 Base / Large Mogul Style
• LED retrofit bulb. Easy Energy Savings
• High Efficiency LEDs - 130 Lumens to Watt
• 360 Degree LED Corn Light Output
• IP64 waterproof rating for indoor and covered outdoor use
• Latest Technology: SMD2835 LEDs with 50,000 Life
• 110-277 Volt compatible
• Bright White 5000K color (3000K, 4000K, 5000K, and 5700K available)
• Aluminum with plastic cover
• Not DLC Listed (use Rotani 33-550 or Aries 3 SKU 33-523 Series for DLC Listed bulbs)
• Warranty: 5 Years - Rock Solid Warranty

• BETTER DESIGN - New Philips Luxeon SMD 3030 LED modules 130 Lumens per watt - Save even more by using a lower watt unit. Compare the lumens against others. Premium grade components make this an industrial grade LED Wall Pack Light
• BRIGHT LIGHT The 60 watt is rates at over 7,232 lumens by DLC. 7,232 Lumens can replace a 150-175 watt HPS/HID/ Metal Halide light or 500 watt Incandescent. 5000K light color ensures a bright clear light. Over 100 degree angle creates a wide light distribution.
• BUILT TO LAST - 100,000 LED saves having to replace bulbs- Aluminum Housing with high tech Heat Sink. Better Heat dissipation ensures longer LED life and safety. IP65 Waterproof for all weather conditions. All backed by a 5 year warranty.
• CERTIFIED - UL Listed and DLC verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification of performance.
• EASY INSTALLATION & OPTIONAL PHOTOCELL. Unit has 3 conduit entrance locations and a standard circle cutoff in the rear for easy installation. Whether you are retrofitting an old unit or doing new construction, these are easy to use. Dusk to Dawn sensors (Photocells) can be added but are not required.

• Input Voltage Range: 100-277VAC
• Frequency: 50/60Hz
• Power Factor: >0.9
• MAX THD(%): 15
• Materials: All New Components
• Efficiency: over 130lm/W
• Color Rendering Index (CRI): 72+
• Color Temperature (CCT): 5000K (3000K-5700K optional)
• Lens Materials: Tempered Glass
• Housing Materials: Die Casting Aluminum
• IP Rating: IP65 Outdoor Rated
• Certification: UL Listed.
• DLC Rated
• Life Span: 100000+ Hours
• Dimensions 60-80 watt 360mm x 259mm x190mm. 100-120watt 463mm x 232mm x 235mm
• Photocell optional: Can be used with or without
• Warranty: 5 Years

• HEAVY DUTY Compre the size! 7 inch square heavy duty design with double strength welds that can hold up to 100lbs. There are cheaper smaller brackets but only ours ensures the bracket and light stay up and last. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE Bracket protrudes 9.8 inches(251mm) from the wall. The arm sticks up 8 inches(204mm)(from center of arm). Tube is 2 inches wide.
• FLEXIBLE USES - Designed to allow any of our slip fit parking lot lights, Street lights or solar street lights to be mounted to a wall. With a 9.8 inch extension from the wall, you can now angle a light exactly where you need it. Even if the light needs to be sideways from the wall! Minimalist design allows for use anywhere.
• EASY INSTALL & INSTRUCTIONS Bracket is easy to install. Run the wiring through and secure to wall with 4 bolts.(hardware not included). Wire the light and then slide the light over the arm. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

• Heavy Duty Steel Construction
• Can support up to 100lbs
• Large Size - 7 Inch Square. Stand the Test of Time!
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube allows for slip fits to slide over
• Please note that NO hardware is included
• Warranty 5 Years

• DUSK TO DAWN SENSOR (PHOTOCELL) BUILT IN. Dusk to Dawn sensors (Photocells) are built in, but can be removed. 40-80 watt are 14 inch housing. 360mm x 259mm x190mm. 100-120 are 18 inch. Housing is black (some pictures may make it appear lighter) whether you are retrofitting an old unit or doing new construction, these are easy to use. Unit has 3 conduit entrance locations and a standard circle cutoff in the rear for easy installation.
• BETTER DESIGN - New Philips Luxeon SMD 3030 LED modules 130 Lumens per watt - Save even more by using a lower watt unit. Compare the lumens against others. Premium grade components make this an industrial grade LED Wall Pack Light
• BRIGHT LIGHT The 60 watt is rates at over 7,232 lumens by DLC. 7,232 Lumens can replace a 150-175 watt HPS/HID/ Metal Halide light or 500 watt Incandescent. 5000K light color ensures a bright clear light. Over 100 degree angle creates a wide light distribution.
• BUILT TO LAST - 100,000 LED saves having to replace bulbs- Aluminum Housing with high tech Heat Sink. Better Heat dissipation ensures longer LED life and safety. IP65 Waterproof for all weather conditions. All backed by a 5 year warranty.
• CERTIFIED - UL Listed and DLC verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification of performance.

• Real Glass and Aluminum - Not Plastic
• Input Voltage Range: 100-277VAC
• Frequency: 50/60Hz
• Power Factor: >0.9
• MAX THD(%): 15
• Materials: All New Components
• Efficiency: over 130lm/W
• Color Rendering Index (CRI): 72+
• Color Temperature (CCT): 5000K (3000K-5700K optional)
• Lens Materials: Tempered Glass
• Housing Materials: Die Casting Aluminum
• IP Rating: IP65 Outdoor Rated
• Certification: UL Listed. DLC Rated
• Life Span: 100000+ Hours
• Dimensions 60-80 watt 360mm x 259mm x190mm. 100-120watt 463mm x 232mm x 235mm
• Photocell optional: Can be used with or without
• Warranty: 5 Years

• ONE DIRECTION IS MORE EFFICIENT- If your fixture only projects light in one direction, why waste energy sending light where you don t use it? You can often use 20-30% less watts with a 180 degree bulb compared to a 360 bulb. The 115 watt is a great upgrade to a 400 watt Metal Halide or HPS bulb. Rotatable base allows you to aim the light where you need it.
• BRIGHT LIGHT - 115 Watt has up to 14,900 Lumens and can used in parking lot lights, street lights, wall packs or more to replace 400 watt HPS/HID/ Metal HALIDE lights, 800W incandescent or 300W CFL. 4000K light color for natural white light
• BETTER DESIGN - 50,000 Hour Life! Over 26 years! These LED Corn Bulbs uses LED Upgraded to the latest LEDs. Philips Luxeon 3030 Technology gets over 120 effective lumens per watt and project light exactly where you need it. E39 LED Corn Bulb Style. LED Corn Light. Designed for better cooling with Larger Size, aluminum Heat Sink and built in fan ensure long life performance
• QUALITY AND WARRANTY - High quality aluminum design has been upgraded to an IP54 Waterproof rating for even further performance and life span. Unit is backed by our 5 Year Warranty.
• CERTIFIED - UL Listed for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability.

• E39 Base / Large Mogul Style
• 54 Watt Model: 7,000 Effective Lumens
• 75 Watt Model: 8,800 Effective Lumens
• 115 Watt Model: 14,900 Effective Lumens
• LED retrofit bulb. Easy Energy Savings
• 180 Degree LED Corn Light Output = Higher Effective Lumens
• High CRI of 74+ for high quality light
• IP64 waterproof rating for indoor and covered outdoor use
• Latest Technology: SMD3030 LEDs with 50,000 Life
• 110-277 Volt compatible
• Natural White 4000k color or 5000K Bright White
• Materials: Aluminum & Plastic
• UL Listed- E486918 go to the UL website to verify we have been certified
• Warranty: 5 Year

• HEAVY DUTY Heavy duty steel design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE Bracket protrudes 5.5 inches from the wall. Tube is 2.2 inches wide.(designed for 2 3/8 inch slip fits). Base is about 7 inches square.
• FLEXIBLE USES - Designed to allow any of our slip fit parking lot lights, Street lights or solar street lights to be mounted to a wall. With a 9.8 inch extension from the wall, tou can now angle a light exactly where you need it. Even if the light needs to be sideways from the wall! Minimalist design allows for use anywhere.
• EASY INSTALL & INSTRUCTIONS Bracket is easy to install. Run the wiring through and secure to wall with 4 bolts.(hardware not included). Wire the light and then slide the light over the arm. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

• Heavy Duty Steel Construction
• Large Size - 7 inch square. Built to stand the test of time
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube allows for slip fits to slide over
• Please note that NO hardware is included
• Warranty 5 Years

Yoke Mount for 30 to 80 Watt Kivo & Kivo II Series LED Flood Lights

• BRIGHT LIGHT - 22 Watt is rated at 3100 Lumens and can replace T12 and T8 Fluorescent Light Bulbs. 5000K provides a Bright White Color. Uses the latest LED chipset technology for high efficiency and even light distribution. No bright spots or dull spots.
• EASY INSTALLATION - Easy LED retrofit. Multiple install options: Type A to use with your existing compatible ballast, Type B for direct line voltage and Type A+B for compatible ballasts and direct line voltage for when that old fluorescent ballast fails, just bypass it and use the same bulb. Looks great in a retail or office environment when used in a variety of T8 tube fixtures. Type C external ballast for dimmability available, please call us for more information.
• BETTER DESIGN & WARRANTY - 100,000hr+ Long Life LEDs outlast the competition, 3 times longer a fluorescent T12 or 70% longer than a fluorescent T8. 5 Year No-Hassle Warranty with US Customer Support
• CERTIFIED - UL listed and DLC verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification.

• Available in Type A (Ballast Compatible), Type B (Line Voltage - Single/Double ended) and Type A+B (Ballast Compatible or Line Voltage Single/Double ended). Please call us regarding Type C (external driver).
• Length - 48"
• 30 bulb pack
• 3000 Lumens - High efficiency design
• Color Selectable: 3500K/4000K/5000K/5700K/6500K
• Frosted Lens
• Dimmable - Type C bulbs with external drivers only, please call for Type C options.
• UL and DLC Listed
• Warranty 5 Years

• HEAVY DUTY Heavy duty Steel design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)=
• FLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Steel Construction


• Dimensions for 5" adapter (Part# 78-124) - 5.5" inside width to easily fit over a 5" square pole, 7.25" tall and 17" overall width including tenon pipes.

• Dimensions for 4" adapter (Part# 78-123) - 4.4" inside width to easily fit over a 4" square pole, 7" tall and 16.5" overall width including tenon pipes.


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Please note that NO hardware is included


• Warranty 5 Years

• HEAVY DUTY Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)=
• FLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Steel Construction

• Dimensions for 5" adapter (Part# 78-124) - 5.5" inside width to easily fit over a 5" square pole, 7.25" tall and 17" overall width including tenon pipes.

• Dimensions for 4" adapter (Part# 78-123) - 4.4" inside width to easily fit over a 4" square pole, 7" tall and 16.5" overall width including tenon pipes.


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Please note that NO hardware is included


• Warranty 5 Years

Slip Fit Mount for NextGen II, NextGen XT, NextGen III Shoebox Lights - Black

(WIL NOT FIT NEXTGEN IV OR REVATI II or Nextgen IV)

• HEAVY DUTY - Heavy duty steel design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (4 bolts are included. May not be applicable to all installs. Some hardware may need to be purchased)
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL - Bracket is easy to install. Run the wiring through and secure to pole (check hardware). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY - High quality design is backed by our 5 Year Warranty.

• Slides over a 2.5 to 3 inch round pole
• Heavy Duty Steel Construction
• Large Size
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube for light on top allows for slip fit mounts to slide over
• Please note that we cannot guarantee hardware for every install is included.
• Warranty 5 Years

• BRIGHT LIGHT 150 Watts has up to 19500 Lumens and can replace to 400 watt Metal Halide/ HPS lights, 600W incandescent or 200W CFL. 5000K light color ensures a natural white light
• EASY INSTALLATION Easy LED retrofit. Connects directly into E39 Mogul Bases. Just screw in. Please note that in some cases the ballast may have to be bypassed when changing to LEDs. Most are plug and play but please check. (LEDs uses a driver, not a ballast)
• DESIGNED FOR BAY LIGHTING- Uses LED SMD2835 Technology and ensures all light is pointed down for better efficiency. Uses 120 angels to spread the light wider. Ideal for installing at lower heights. E39 LED Corn Bulb Style. LED Retrofit Bulb. Designed for better cooling with Larger Size, aluminum Heat Sink and innovative open center to ensure long life performance
• QUALITY AND WARRANTY High Quality Aluminum Design has an IP64 Waterproof rating. Unit is backed by our 5 Year Warranty.
• CERTIFIED - UL Listed and verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability.

• BRIGHT LIGHT 150 Watts has over 20,000 Lumens and can replace a 400 watt Metal Halide or High Pressure Sodium lights, 250W incandescent or 90W CFL. 5000K light color ensures a bright clear light. This LED Canopy LED Light is the ideal way to go LED and save money!
• EASY INSTALLATION - Easy LED retrofit. High efficiency LED fixture can be bolted into a ceiling or set up as a recessed light. Looks great in a retail or office environment when used as troffer style panel light.
• BETTER DESIGN - Uses 2835 LED Technology to obtain 135 lumens per watt and project light in a 120 degree fashion. DLC premium ensures 90% light maintenance for 36000 hours.
• QUALITY AND WARRANTY - 5 Year warranty with USA based support. High Quality aluminum Design has an IP65 Waterproof rating. Fixture is designed for better cooling with Larger Size, aluminum Heat Sink to ensure long life performance.
• UL AND DLC PREMIUM RATED UL listed for safety and DLC Premium (RG-CANOPY-G3-150W) for energy rebates. DLC stands for Design Lighting Consortium and verifies actual light performance. The 150 watt LED Canopy Light is verified at 20,000 Lumens!

• Actual wattage:150 watt
• Replacement Wattage: 400 watt Metal Halide or High Pressure Sodium
• 100-277vac Compatible (Multivolt Driver)
• Direct surface or recessed mount
• High efficiency design
• IP65 waterproof for indoor and outdoor use
• Bright white 5000k color
• Dimensions: 15 inch x 15 inch x 2.5 inch
• Aluminum Housing
• Polycarbonate Glare Reducing Lens
• 120 Degree Wide beam angle
• Warranty: 5 Years
• USA Based Support
• LM90 36,000 Hours
• LEDs 100,000 Hours
• UL listed
• DLC Premium listed for rebates.

• BRIGHT LIGHT 150 Watts has over 20,000 Lumens and can replace a 400 watt Metal Halide or High Pressure Sodium lights, 250W incandescent or 90W CFL. 5000K light color ensures a bright clear light. This LED Canopy LED Light is the ideal way to go LED and save money!
• EASY INSTALLATION - Easy LED retrofit. High efficiency LED fixture can be bolted into a ceiling or set up as a recessed light. Looks great in a retail or office environment when used as troffer style panel light.
• BETTER DESIGN - Uses 2835 LED Technology to obtain 135 lumens per watt and project light in a 120 degree fashion. DLC premium ensures 90% light maintenance for 36000 hours.
• QUALITY AND WARRANTY - 5 Year warranty with USA based support. High Quality aluminum Design has an IP65 Waterproof rating. Fixture is designed for better cooling with Larger Size, aluminum Heat Sink to ensure long life performance.
• UL AND DLC PREMIUM RATED UL listed for safety and DLC Premium (RG-CANOPY-G3-150W) for energy rebates. DLC stands for Design Lighting Consortium and verifies actual light performance. The 150 watt LED Canopy Light is verified at 20,000 Lumens!

• Actual wattage:150 watt
• Replacement Wattage: 400 watt Metal Halide or High Pressure Sodium
• 100-277vac Compatible (Multivolt Driver)
• Direct surface or recessed mount
• High efficiency design
• IP65 waterproof for indoor and outdoor use
• Bright white 5000k color OR 5700K
• Dimensions: 15 inch x 15 inch x 2.5 inch
• Aluminum Housing
• Polycarbonate Glare Reducing Lens
• 120 Degree Wide beam angle
• Warranty: 5 Years
• USA Based Support
• LM90 36,000 Hours
• LEDs 100,000 Hours
• UL listed
• DLC Premium listed for rebates.

• HEAVY DUTY Heavy duty steel design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (4 bolts are included. May not be applicable to all installs. Some hardware may need to be purchased)
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL - Bracket is easy to install. Run the wiring through and secure to pole (check hardware). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY - High quality design is backed by our 5 Year Warranty.

• Heavy Duty Steel Construction
• Large Size
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube for light on top allows for slip fit mounts to slide over
• Please note that we cannot guarantee hardware for every install is included.
• Warranty 5 Years

• HEAVY DUTY Heavy duty steel design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us.
• FLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware included, but may not fill all applications. Some poles may require different or stronger bolts. Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY - High quality design is backed by our 5 Year Warranty.

• Quickly convert any pole to slip fit for ease and maximum flexibility
• Heavy Duty Steel Construction
• Large Size
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube allows for slip fits to slide over
• Please note that hardware included, but may not fill all applications. Some poles may require different or stronger bolts.
• Warranty 5 Years

• BETTER DESIGN - Our LED Post Top Fixture uses 2835 LED modules that produce up to 125 Lumens per watt - Save even more by using a lower watt unit and still getting the light you need. Focus on your lumen needs, not on watts. This LED area light only uses Premium grade LED components. High strength housing make this an industrial grade LED Parking lot or Shoebox light.
• BRIGHT LIGHT - 150 Watt LED puts out 19,200 Lumens and can replace a 400 or 500 watt Metal halide MH or HPS/HID light. 5000K light color ensures a bright clear light. Light can be used as Parking Lot Lights, Street Lights, walkways, roadways or any other use.
• PHOTOCELL INCLUDED - This model has a 3 prong photocell receptacle on top
• 0-10V DIMMABLE & EASY ADJUSTABLE MOUNT Driver is 0-10V dimmable. Light comes with a slip-fit mount designed to fit on standard circular poles. Inner diameter is 2 3/8 inches, so pole can be 2 - 2.4inches.
• BUILT TO LAST - 100,000 LED saves having to replace bulbs- Aluminum Housing with high tech Heat Sink. Better Heat dissipation ensures longer LED life and safety. IP65 Waterproof for all weather conditions. All backed by a 5 year warranty.
• CERTIFIED - UL Listed and DLC Premium 5.1 verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification. They have certified the light at 135+ Lumens per watt

• Input Voltage Range: 100-277VAC
• Frequency: 50/60Hz
• Power Factor: >0.91
• MAX THD(%): <=20
• 150watt Dimensions with Slip Fit: 600mm H x 529mm W x 450mm D
• 150 watt Weight: 6.5kG Net, 835kG Gross
• Perconi is designed to go over a 3" or 2.38" without additional bolts. Anything over a 3" requires a reducer to the 2.38
• Up to 140 Lumen to watt
• Light Angle: 120 degree (different beam angles available, call for more info) Type V
• Dimmable: Yes (0-10v compatible)
• Color Rendering Index (CRI): 84+
• Color Temperature (CCT): 5000K. (4000 and 5700K also available)-
• Lens Materials: Optical Polycarbonate
• Housing Materials: Aluminum Alloy
• IP Rating: IP65 Outdoor Waterproof Rated
• Certification: UL Listed, cUL Listed
• Certification: DLC Premium 5.1 Listed;
• DLC 5.1 Premium Product Code: RGL-CENTAURI2-150W
• LM90 36,000 hours
• Life Span: 150000+ Hours
• EPA Ratings: Click Here
• Warranty: 5 Years

• EASY INSTALL - Easy to replace old units or for new installation
• MULTI USE - Fits inside a conduit entrance for use in various wall light and other fixtures
• MULTIVOLT - 100-277vac compatible
• QUALITY AND WARRANTY Unit is backed by our 1 Year Warranty.
• SIZE" x 2.75" x 1.5"
• WIRES - 3 wires.   Hot in, hot out and shared neutral (connect to other white/neutrals)

• EASY INSTALL - Easy to replace old units or for new installation
• MULTI USE - Fits in any standard NEMA 3 pin socket
• MULTIVOLT - 100-277vac compatible
• QUALITY AND WARRANTY Unit is backed by our 1 Year Warranty.
• SI" x 3" x 2"
• WIRES - 3 Prongs. No wires.

• HEAVY DUTY Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)=
• FLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Steel Construction


• Large Size


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Please note that NO hardware is included


• Warranty 5 Years

• BRIGHT LIGHT = BIG SAVINGS!! -50 Total Watts (10 Watts per light, 5 lights per string) has up to 6000 Lumens (1200 Lumens per light) and can replace 150 Watts Metal Halide/HID/HPS lights, 350W incandescent or 100W CFL. Save up to 80% on your energy! 5000K light color ensures a bright clear light.
• EASY INSTALLATION - Long 15.15m (50ft) cord allows for extended runs. Loops are easy to hang anywhere.
• EXTENDABLE - Connect up to 10 sets together using the built in extender plug for 500 ft of LED lighting.
• BETTER DESIGN - 50,000 Hour Life! Over 26 years! These Temporary Lights use the latest LED SMD2835 Technology to obtain 120-135 lumens per watt and project light in a 360 degree fashion. Using tried and true LED Corn Bulb Technology to spread light in every direction. Built in Heat Sink to ensure long life performance.
• QUALITY AND WARRANTY - 5 Year Rock Solid Warranty. High Quality Aluminum design and plastic shell give it an IP65 Waterproof rating. Additional protection from dust and moisture to extend its life. LEDs are rated for 25+ years of use.
• CERTIFIED - ETL Listed (E486918) to ensure better quality, safety and reliability.

• 15.15m/50ft Cord
• Fanless Design
• 50 watt model has 6,000 Total Lumens
• 100 Watt model has 12000 Total lumens
• Connect up to 10 strands
• 360 Degree LED Corn Light Output
• High CRI of 80+ for high quality light
• IP65 waterproof rating for indoor and outdoor use
• Cool Running SMD2835 LEDs with 50,000 Life
• 120 Volt - USA 2 prong plug standard
• Available in 3000K Warm, 4000K natural or 5000K pure white
• Plastic Housing with Aluminum Wire Mesh
• ETL Listed
• Warranty: 5 Years

• BRIGHT LIGHT = BIG SAVINGS!! -60 Watts has over 7,800 Lumens and can replace 125-175 Total Watts of Metal Halide/HID/HPS lights, 450W incandescent or 120W CFL. Save up to 80% on your energy! 5000K light color ensures a bright clear light.
• EASY INSTALLATION - Easy hook mount included, other options available. Connect light after light. Hooks are easy to hang anywhere.
• EXTENDABLE - Connect up to 16 sets together using the built in extension socket for 160 feet of light when you need it.
• BETTER DESIGN - 50,000 Hour Life! Over 26 years! Built in Surge Protection to Ensure a Long Life! These Temporary Lights use the latest LED SMD2835 Technology to obtain 120-135 lumens per watt and project light in a 360 degree fashion. Using tried and true LED Corn Bulb Technology to spread light in every direction. Built in Heat Sink to ensure long life performance.
• QUALITY AND WARRANTY - 5 Year Rock Solid Warranty. High Quality Aluminum design and plastic shell give it an IP65 Waterproof rating. Additional protection from dust and moisture to extend its life. LEDs are rated for 25+ years of use.
• SURGE PROTECTION - Built in 6KV Surge Protection to ensure a long life and protection from voltage spikes.
• CERTIFIED - ETL Listed (E486918) to ensure better quality, safety and reliability.

• Long 10 Foot Cord
• Fanless Design
• 60 watt model has 7,200 Total Lumens
• 100 Watt model has 13000 Total Lumens
• Connect up to 10 strands of the 100 watt lights or 16 strands of the 60 watt lights
• 360 Degree LED Corn Light Output
• High CRI of 80+ for high quality light
• IP65 waterproof rating for indoor and outdoor use
• Cool Running SMD2835 LEDs with 50,000 Life
• 120 Volt - USA 2 prong plug standard
• 5000K Bright White Standard (Available in 3000K Warm, 4000K natural or 5000K pure white)
• Plastic Housing with Aluminum Wire Mesh
• ETL Listed
• Warranty: 5 Years

• DUAL TENON - Covert single tenon to dual tenon
• BRONZE COLOR - Housing is dark brown/bronze.
• HEAVY DUTY - Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• EPA - The epa rating for this light is 1.0
• MAX LOAD - This bullhorn has a max load of 176lbs.(88lbs per tenon)
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments. Comes with mounting hardware.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Steel Construction


• Large Size


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Comes with mounting hardware.


• Warranty 5 Years

• DUAL TENON - Covert single tenon to dual tenon
• BRONZE COLOR - Housing is dark brown.
• HEAVY DUTY - Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Included hardware to secure base to any standard 2 3/8" tenon adapter.
• EPA - The epa rating for this light is 2.1
• MAX LOAD - This bullhorn has a max load of 353lbs(88lbs per tenon)
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us.
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments. Comes with mounting hardware.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Steel Construction


• BRONZE COLOR
  
  
• Large Size


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Comes with mounting hardware.


• Warranty 5 Years

• Heavy Duty Steel Construction (Call for Aluminum or Fiberglass)
• Color: Bronze Powder coat Finish (Call and ask about black or custom paint)
• Large Size: 11Guage Heavy Duty Steel for 10-25' Poles.
• Extra Strength Welds
• 120 MPH Wind Rating (FL & Gulf States often require higher. See 72-121 or 72-126 for higher wind rating )
• Compatible with standard 2.38-inch tenon adapter mounts (sold separately) for secure slip-fit installation
• Please note that NO hardware is included. Accessory Kit is strongly Recommended
• Warranty 1 Year

• Heavy Duty Steel Construction (Call for Aluminum or Fiberglass)
• Color: Bronze Powder coat Finish (Call and ask about black or custom paint)
• Large Size: 11Guage Heavy Duty Steel for 10-25' Poles.
• Extra Strength Welds
• 120 MPH Wind Rating with EPA 1.6 (see spec sheet for full chart) (FL & Gulf States often require higher MPH. See 72-121 or 72-126 for higher wind rating or higher EPA limits)
• Compatible with standard 2.38-inch tenon adapter mounts (sold separately) for secure slip-fit installation
• Please note that NO hardware is included. Accessory Kit is strongly Recommended
• Warranty 1 Year

• HEAVY DUTY Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)=
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

• Heavy Duty Steel Construction
• Large Size
• Extra Strength Welds
• Minimalist Design works in any area
• 2 inch tube allows for slip fits to slide over
• Please note that NO hardware is included
• Warranty 5 Years

• BETTER DESIGN Our NextGen XT Model LED Parking Lot Light uses new Lumileds 5050 LED modules that produce up to 170 Lumens per watt - Save even more by using a lower watt unit and still getting the light you need. Focus on your lumen needs, not on watts. This LED area light only uses Premium grade LED components. High strength housing make this an industrial grade LED Parking lot or Shoebox light.
• BUG RATING - What is it? Industry term for Backlight, Uplight and Glare. These either waste light or are harsh on the eyes. Already low on the Nextgen II, these are further minimized in the XT. Sub 20% backlight and sub .5% uplight. More light where you want it! The NextGen II was already good and now the leading performance of the NextGen series continues with the XT
• RIGHT LIGHT 185 Watt LED puts out 30,000 Lumens and can replace a 400 or 500 watt Metal halide MH or HPS/HID light. 5000K light color ensures a bright clear light. Light can be used as Parking Lot Lights, Sports Court Lights, Street Lights, walkways, roadways or any other use.
• PHOTOCELL INCLUDED - This model has a 3 prong photocell receptacle on top
• 0-10V DIMMABLE & EASY ADJUSTABLE MOUNT Driver is 0-10V dimmable. Light comes with an adjustable slip mount designed to fit on standard circular poles. Inner diameter is 2 3/8 inches, so pole can be 2 - 2.4inches. With slip mount the LED Parking Lot light can be angled up or down depending on if you are mounting vertical or horizontal. The most versatile mount option.
• BUILT TO LAST - 100,000 LED saves having to replace bulbs- Aluminum Housing with high tech Heat Sink. Better Heat dissipation ensures longer LED life and safety. IP65 Waterproof for all weather conditions. All backed by a 5 year warranty.
• CERTIFIED - UL Listed and DLC Premium 4.3 verified for safety and rebate eligibility. UL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification. Even with the difficult Premium 4.4 tests, they have certified the light at 158 lumens to watt.

• Input Voltage Range: 100-277VAC
• XT uses Meanwell HBG Driver
• Exceeds Title 24 LED Requirements
• Additional 10 Kilovolt Surge Protector Built in
• Respirator installed for pressure equalization in compartment
• Frequency: 50/60Hz
• Power Factor: >0.91
• MAX THD(%): 12
• 185 Watt Light is 13.5lbs and is 22x13 inches, box is Approx 26x15x6 Inches
• 300 Watt Light is 22lbs and is 30x13 inches, box is approx 33x15x6.5 inches
• LEDs - Lumileds 5050
• Up to 170 Lumen to watt
• Light Angle: 150 x 85 degree. Type III
• Dimmable: Yes (all NextGen XT wattages are 0-10v compatible)
• Color Rendering Index (CRI): 75+
• Color Temperature (CCT): 5000K. (4000 and 5700K also available)-
• Lens Materials: Optical Polycarbonate
• Housing Materials: Die Cast Aluminum
• IP Rating: IP65 Outdoor Waterproof Rated
• Certification: UL Listed, cUL Listed
• Certification: DLC Premium Listed
• LM90 36,000 hours
• Life Span: 100000+ Hours
• Warranty: 5 Years

Titan III Series UFO High Bay LED Lighting System 100,000 Hours Commercial Grade high bay light

• BRIGHT LIGHT - Independently Rated by DLC. The 20 watt is rated at 2400 Lumens. 2400 Lumens to brightly light areas around your house. Motion sensor flood lights are ideal for visibility and security. Light is even and natural to the eyes
• BETTER MOTION SENSOR - Included Motion sensor has a much wider 240 degree range making it better and picking up motion along the wall. Wider range improves safety and light response time Sensor is also better at sensing true motion. No more false alarms or having a light that never goes off. Adjustable controls included.
• HIGH TECH DESIGN -New LED modules Improve Efficiency and extend life. 100,000 Hour LED ensures a 20 plus year life and never having to change bulbs again. Premium grade components make this an industrial grade LED Flood light Color choices are White or Bronze
• ADJUSTABLE & EASY INSTALLATION - Light heads and sensor are all adjustable to the angle that you need it. Unit is easy to install in standard wall junction boxes. Whether you are retrofitting an old unit or doing new construction, these are easy to use.
• CERTIFIED & BUILT TO LAST - ETL Listed and DLC verified for safety and rebate eligibility. ETL Certified products ensure better quality, safety and reliability. DLC is the Design Lights Consortium for independent verification of performance. Aluminum Housing, weatherproof finish and IP65 Certified for all weather conditions. All backed by a 5 year warranty.
• DISTANCE - The sensor is capable of picking up motion at over 40 ft. Real world conditions will reduce that to an average of 20-30ft, but your distance may vary. These are Passive Infrared Sensors or PIR and subject to limitations. PIR will be less sensitive in windy or very dark conditions. Some objects, particularly metals, can reduce the range. Place in clear line of site without metal objects and add some ambient lighting, such as solar lights, to increase the range.

• Input Voltage Range: 120VAC
• Frequeny: 50/60Hz
• Power Factor: >0.99
• MAX THD(%): 10
• Efficiency - up to 120 lm/watt
• Materials: All New Components
• Color Temperature (CCT): 3000K Warm White Light or 5000K Bright White
• Housing Materials: Die Casting Aluminum
• Lens: Acrylic
• IP Rating: IP65 Outdoor Rated
• Color Rendering Index (CRI) 80+
• Min. Ambient Temp -30.0 F / -34.4 Max. Ambient Temp 130.0 F / 48.9
• Finish Bronze or White Available
• Life Time 100,000 Hours
• ETL Listed
• DLC Listed
• Warranty 5 Years

• HEAVY DUTY Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
• LARGE INDUSTRIAL SIZE - Built to stand up to decades of us.
• SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjust ability. Side to side and up and down adjustments. Comes with mounting hardware.
• EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
• QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.

. It is made of thick aluminum with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

• Heavy Duty Aluminum Construction


• Large Size


• Extra Strength Welds


• Minimalist Design works in any area


• 2 inch tube allows for slip fits to slide over


• Comes with mounting hardware.


• Warranty 5 Years