How to Use the RTX Remote Control With Our Motion Sensor Lights

Introducing our versatile remote control, designed to simplify the programming of motion sensors for a wide range of Rugged Grade lights (see notes). With the convenience of this remote control, you can effortlessly program multiple lights using just one device. 

To set it up our motion sensors with the remote, please follow these steps: 

IMPORTANT: Before you start programming your remote, remove the plastic prong protector from the sensor.

Before starting, press the reset button on the remote to clear any previous programming. 

Daylight Setting: Ensure the light is set to "On" for dusk to dawn feature. If it's off, press and hold the eye symbol to activate it. Set the daylight sensitivity to 100. Adjust it to 50 if the light comes on too early in the evening. 

Brightness: Set it to 100% for the desired brightness when motion is detected. 

Hold Time: Determine how long you want the light to stay at full brightness after detecting motion. Once the selected time has passed, it will dim down to the selected dim percentage. 

Standby Dim: Choose how dim you want the light to be when there is no motion. 

Standby Time: Decide how long you want the light to stay dim when there is no motion. We recommend selecting the infinite option. 

Sensitivity: Start with a sensitivity of 75% and adjust it lower if you find it to be too sensitive. 

Daylight: Adjust the sensitivity of the photocell to detect the desired amount of light. A higher number means it will turn on when it's brighter, while a lower number means it will activate in darker conditions. Start at 50 and adjust as needed. 

Once you have selected all the settings on the remote, walk over to the fixture and press the send button on the remote. You will notice the fixture dimming, indicating that it has accepted the settings.